Jet Towel Smart Hand Dryer Silver

The new High-speed Hand Dryer combines an amazing drying performance, a tough exterior and a great cost-performance in a compact body for satisfying user experience.

Industry top-class drying performance and Energy Efficiency

The engineers at Mitsubishi Electric have achieved an amazing 9-12sec drying performance in a compact body. Using only 0.25kWh per 100uses, the Jet Towel Smart is also energy efficient.

Air-speed and Heater Setting Switches Included

There is a choice of two airflow speeds: "High" for prioritized drying and "Standard" for low-noise operation. The heater can be switched on or off.
*The setting switches are located inside the main unit, and can only be set at the time of installation.

*1 Time needed to reduce remaining water to 50mg or less per hand (in-house study)
*2 Measurements made in anechoic chamber at a distance of 2m.

Comfortable to use

Large drying area

With 13.2cm between the air nozzles and the wall, there is even more than enough space for large hands to dry comfortably.

15cm wide nozzle

The wide nozzle spreads airflow across a large area, enabling both hands to be covered at the same time.

0.1sec quick response

Optimized hand sensors quickly react to users input for a more positive user experience. It takes less than 0.1sec for the units to detect hands and begin dispensing air. Since Jet Towel Mini takes 0.4sec, Jet Towel Smart detects your hand 4 times faster than Jet Towel Mini.

Tough exterior

Robust, temper-resistant body (JT-S2AP equipped with metal pane)

The protective steel outer shell and ABS body are designed to take quite a beating. They have been tested to withstand 15 J, which is more than two times the energy of an average impact*. The IPX3 rating for water resistance means that it is also protected against water infiltration from spraying water.
*Mitsubishi Electric estimates

Easy air filter maintenance

The air filter is important as it prevents excess dust and dirt from accumulating inside of the unit.
The filter is placed conveniently right up against the side of the intake grill, allowing for quick cleaning without any disassembly required.

Smart tilted roof design and High level of safety

The top of the Jet Towel Smart is tilted at a 12° angle to prevent users from leaving unwanted trash and other objects on the unit.
The air intake is located separately from the output nozzles to reduce the risk of water intake. A large concern not only for hygiene but for safety/ reliability of the unit.