Kewtech 2 Pole LED Voltage Tester
Product Code: KT1780
Add To Wishlist
In Stock At The Following Branches
Shrewsbury
1 In Stock
Bermondsey
1 In Stock
Guildford
3 In Stock
Leicester
3 In Stock
Telford
1 In Stock
Bedford
4 In Stock
- NEW Clear oversize luminous LEDs shine through voltage level
- NEW Clear audible tone
- NEW UK Specific GS38 Slender probe tips NO NEED to swap ends
- NEW Bright torch light - gives ample illumination
- Fits into recessed terminals such as RCBOs without unscrewing any caps
- Phase Rotation - Bright green LEDs show left or right rotation
- AC & DC Voltage tests up to 690V
- Clear Oversize luminous LED indication
- Soft to touch overmoulded rubber body
- Continuity Test
- Self diagnostic test
- Single Pole phase test
- Phase Rotation test
- Polarity indication
- Auto power on/off
- IP65 rating protects against Dust & Water ingress
- Designed to the new international safety standards IEC 61243-3 & IEC 61010-1
- Cat IV 600V
Included:
- Built in test leads
- Batteries
- Instruction manual with Certificate of Conformity
| Type | Voltage |
|---|---|
| Product | Dectector |
| Measured Current | AC/DC |
| Volts | 12 To 690VAC/VDC V |
| Ingress Protection | IP65 |
| Measuring Range | 0 To 400 Kilo Ohm Continuity |
| Included Accessories | Built In Test Lead Battery Printed Instruction Manual With Certificate Of Conformity |
| Height (mm) | 26 |
| Width (mm) | 64 |
| Length Min Max (mm) | 243 |
| Minimum Operating Temperature | -15 Degrees C |
| Maximum Operating Temperature | 55 Degrees C |
| Minimum Storage Temperature | -20 Degrees C |
| Maximum Storage Temperature | 70 Degrees C |
| Maximum Operational Humidity | 85 % |
| Measuring Voltage | 12 To 690VAC/VDC V |
| Standards | IEC 61010-1/61243-3/61557-7/601010-031 |
| Unit Weight (kg) | 0.19 |
| UK Mainland | Order by 2pm for Next Day Delivery* |
|---|---|
| Under £25.00 | £4.50 |
| Over £25.00 | FREE |
| UK Highlands & Islands | Order by 2pm for Next Day Delivery* |
|---|---|
| Under £80.00 | £15.00 |
| Over £80.00 | FREE |