<< Back Blade Runner will cut the outer sheath of SWA cable up to 28mm in diameter, then uniformly score the SWA strands which protect the inner conductors from damage guaranteeing a fast, accurate, 'straight cut'. Just offer the cable up to the tool, turn the thumbscrew onto the cable until it is relatively tight and spin Blade Runner around the circumference of the cable in the direction of the arrow on the tool, tightening occasionally as it cuts through the sheath and then scores the steel wire. Once the steel wire is scored, the tool is removed and the PVC sheath is either pulled off the end of the cable or is carefully cut off using a knife. Then the scored steel wires can be removed by taking several at a time, and working back and forth until they snap off. Finally, using Blade Runner, cut through only the sheath and remove leaving the stripped and prepared cable ready for termination. The blade provided in the tool is good for 100 terminations and can be easily replaced in less than a minute using a screwdriver. Each tool comes with one spare blade, with further blades available in packs of three.
|  Click image for an enlargement |
